Description
SEE WHAT OUR CUSTOMERS ARE SAYING
I live in New Brunswick. I have 8 km of road to clear. Brush on both sides. This cutter saved me a ton of work with my brushsaw and probably saved me a lot of back pain. Best purchase of the year for me . Thanks guys!
How long much time it saved me by using the Samurai ? It usually took my employee and I about 2 1/2 weeks to prune my bushes using a hand held commercial gas trimmer. Using the Samurai cut down the time required to only two days. The biggest benefit from using it however is the clean cut of the blueberry canes. Most products on the market tear the canes and leave it more susceptible to disease infiltration. A cleaner cut helps limit the spread of disease.
Using the info from the support at you company. I built 90% of my mount. I wanted the blade to be 24” outside my tractor. Used scrap metal around the shop, including an old basketball goal post. So don’t laugh!
Everything I expected, love. I have two friend who will be ordering soon!
Just had the unit hosed and flow controller set up. Cuts very nice, gives a great finish. When its not hammering down with rain, and when i have learnt best how to use the Sabre, Ill grab some footage and good quality images for you with it at work. None the less, really very very happy with the product within 10 minutes of use.
I designed the adaptor and I used your bucket bracket for the angle selection, it was strong enough. Everything is easy and fast to remove to use the bucket. Also I can put the cutter direct in front of the bucket (not shown in the video). The step 2 I will add design to add hydraulic to adjust angle. I think you will have some orders from people around here.
Samurai To The Rescue
We live in South East Mississippi on 4 acres…lots of pecan trees and the property is heavily landscaped. All of this is also heavily landscaped. Needless to say all this trim available vegetation was keeping me busy…plus we had 2 garden sites and 24 trees. By the time we finished with the hedge work it was time to start again. I have used up one hedge trimmer and the one still operating was getting tired. I started looking for a new trimmer and also a sickle-bar mower as I had heard about the smaller mowers being used to hedge trim. I finally picked up a Web Thread to the Samurai Trimmer and I knew after viewing the video we had a solution that was viable and much safer than converting and old sickle bar. What use to take us over a month to trim (and immediately start again) can now be maintained in a 3 to 4 day period. Think the Samurai Hedge Trimmer is only for larger properties…think again.
The Deluxe EZ Mount Bracket
Add a mounting bracket to your Samurai with our Deluxe EZ Mount Bracket.
• Position up to 40 degrees below grade to allow cutting of embankments.
• Adjustable safety break-away.
• Adjustable break-away tensioner
• Break-away lock out feature
Break Away Protection
Can’t always see what you’re cutting, protect your Samurai with the Deluxe EZ Mount Bracket break away. Should the knife encounter too much force the bracket will break away preventing possible damage to the Samurai. Simply push to lock the knife back into cutting position..
Multi Break Away Protection
The break away feature works in all knife positions. Want to lock the knife into a vertical or horizontal position, use the break away lock by placing a pin through the lock.
Break Away Tensioner Adjustment
Vary the force required for the break away to your specific requirements. Use an allen key to increase or decrease the break away force needed.
Cut Below Grade
With unlimited cutting positions from vertical to horizontal, the Samurai can handle all your cutting jobs. The Deluxe EZ Mount Bracket also adds the ability to position the knife up to 40 degrees below grade. Now you can cut along pond edges, ditches, and embankments with ease.
Watch this quick video on how to install your Deluxe EZ Mount Bracket.
FEATURES OF THE SABRE SAMURAI
BENEFITS
Adaptable to multiple equipment from subcompact tractors to skid steers
Minimal hydraulic flow requirements allowing for use on almost any equipment
38” cutting bar for wide cutting swath.
Mounting bracket mounts to any size bucket for versatility
High torque hydraulics cuts up to 1 ½” material
Horizontal/vertical & below grade positioning for universal versatility.
Installation and removal in a matter of minutes with simple hand tools
Trimming fall into loader bucket for easy clean up
Maintenance free for ease of use.
THE 2024
- Oscillating cam connecting two cutting blades.
- Powered by hydraulic motor.
- Speed of blades vary by hydraulic flow.
- 2-inch opposing sickle sections.
- Cut material up to 1 1/2″ inches in diameter.
- The 38-in cutter only requires 3 to 4.5 gal/min.
- Cut vertically, horizontally, or at any angle between with our Deluxe EZ Mount Bracket.
- Hydraulic Hoses or fittings not included.
- #10 ORB Male fittings will be required with hoses to operate
Hydraulic Motor | 3.0 cu in/rev. High Torque |
Hydraulic oil flow requirements | 3.5 to 4.5 GPM |
Hydraulic Pressure | Ranges from 500-2,000+ psi depending on thickness of material being cut |
Hose requirements(not included) | 1/2 diameter with #10 ORBM fitting (larger HP tractors) 3/8 diameter with #10 ORBM fitting (subcompact tractors) |
Overall length | 48 inches |
Overall width | 10.35 inches |
Overall height | 9.81 inches |
Cutter weight | 50 lbs |
Bracket Weight | 30 lbs Deluxe EZ Mount Bracket |
Cutting length | 38 inches (cutting area of knife) |
PARTNERS
Turn your tractor into a complete Ground Maintenance
Machine
- Add a Big Tool Rack to carry all your ground maintenance essentials with
you while you trim with your Sabre Samurai. - Click on the logo below to
learn more from our friends at Big Tool Rack.
14 reviews
There are no reviews yet!