Description
2024 SABRE SAMURAI
- Oscillating cam connecting two cutting blades.
- Powered by hydraulic motor.
- Speed of blades vary by hydraulic flow.
- 2-inch opposing sickle sections.
- Cut material up to 1 1/2″ inches in diameter.
- The 38-in cutter only requires 3 to 4.5 gal/min.
- Cut vertically, horizontally, or at any angle between with our Deluxe EZ Mount Bracket.
- Hydraulic Hoses or fittings not included.
- #10 ORB Male fittings will be required with hoses to operate
The Samurai is virtually maintenance free with sealed bearings and a self-lubricating motor. Sickles are easily replaced as they are fastened with capscrews, not rivets.
The Samurai was developed in conjunction with the Canadian Research Council’s Industrial Technology Centre and tested by the Prairie Agricultural Machinery Institute.
Deluxe EZ Mount Bracket + Samurai
Add a mounting bracket to your Samurai with our Deluxe EZ Mount Bracket.
• Position up to 40 degrees below grade to allow cutting of embankments.
• Adjustable safety break-away.
• Adjustable break-away tensioner
• Break-away lock out feature
Break Away Protection
Can’t always see what you’re cutting, protect your Samurai with the Deluxe EZ Mount Bracket break away. Should the knife encounter too much force the bracket will break away preventing possible damage to the Samurai. Simply push to lock the knife back into cutting position..
Multi Break Away Protection
The break away feature works in all knife positions. Want to lock the knife into a vertical or horizontal position, use the break away lock by placing a pin through the lock.
Break Away Tensioner Adjustment
Vary the force required for the break away to your specific requirements. Use an allen key to increase or decrease the break away force needed.
Cut Below Grade
With unlimited cutting positions from vertical to horizontal, the Samurai can handle all your cutting jobs. The Deluxe EZ Mount Bracket also adds the ability to position the knife up to 40 degrees below grade. Now you can cut along pond edges, ditches, and embankments with ease.
Watch this quick video on how to install your Deluxe EZ Mount Bracket.
FEATURES OF THE SABRE SAMURAI
BENEFITS
Adaptable to multiple equipment from subcompact tractors to skid steers
Minimal hydraulic flow requirements allowing for use on almost any equipment
38” cutting bar for wide cutting swath.
Mounting bracket mounts to any size bucket for versatility
High torque hydraulics cuts up to 1 ½” material
Horizontal/vertical & below grade positioning for universal versatility.
Installation and removal in a matter of minutes with simple hand tools
Trimming fall into loader bucket for easy clean up
Maintenance free for ease of use.
PARTNERS
Turn your tractor into a complete Ground Maintenance
Machine
- Add a Big Tool Rack to carry all your ground maintenance essentials with
you while you trim with your Sabre Samurai. - Click on the logo below to
learn more from our friends at Big Tool Rack.
SPECIFICATIONS
Hydraulic Motor | 3.0 cu in/rev. High Torque |
Hydraulic oil flow requirements | 3.5 to 4.5 GPM |
Hydraulic Pressure | Ranges from 500-2,000+ psi depending on thickness of material being cut |
Hose requirements(not included) | 1/2 diameter with #10 ORBM fitting (larger HP tractors) 3/8 diameter with #10 ORBM fitting (subcompact tractors) |
Overall length | 48 inches |
Overall width | 10.35 inches |
Overall height | 9.81 inches |
Cutter weight | 50 lbs |
Bracket Weight | 30 lbs Deluxe EZ Mount Bracket |
Cutting length | 38 inches (cutting area of knife) |
14 reviews
There are no reviews yet!